diff --git a/docs/1_ASSEMBLY.md b/docs/1_ASSEMBLY.md
index 4a0491b..784063b 100644
--- a/docs/1_ASSEMBLY.md
+++ b/docs/1_ASSEMBLY.md
@@ -21,7 +21,7 @@ In addition you will need the following tools:
 * Solder wire
 * Heat shrink tube
 * Some wires
-* Battery connectors (female)
+* Battery connectors (fitting your battery)
 * Velcro tape
 * Self adhesive tape
 * Isolation tape
@@ -68,7 +68,7 @@ In the next step we connect the battery connector pins of the battery shield to
 | Heat the shrink tube with a lighter  |  ![I see fire](https://imaginaerraum.de/git/Telos4/RoboRally/raw/branch/master/docs/images/motor_battery_stack_6.jpeg) |
 | This is how the battery shield should look like with the two wires           |  ![Two wires with heat shrink](https://imaginaerraum.de/git/Telos4/RoboRally/raw/branch/master/docs/images/motor_battery_stack_6.5.jpeg) |
 
-- Next, we create a connector for the female JST 2-Pin connector for plugin in the battery: 
+- Next, we create a connector for the battery. In my case the battery had a male JST 2-Pin connector, so I soldered a female JST 2-Pin connector for plugin it in: 
 
 | Description | Image|
 |--------------|---------------|
diff --git a/docs/3_ROBOT_SETUP.md b/docs/3_ROBOT_SETUP.md
index bacedc6..7790222 100644
--- a/docs/3_ROBOT_SETUP.md
+++ b/docs/3_ROBOT_SETUP.md
@@ -123,7 +123,7 @@ You can control the robot by sending commands to the robot as a string containin
 Have a look at the `keyboard_controller.py` script to see how this works in python.
 
 ### Isolating the electronics
-Since the mounting plates of the robot are made of metal it is a good idea to put some isolation around the electronics. You can use some isolation tape to cover the exposed connections:
+Since the mounting plates of the robot are made of metal it is a good idea to put some isolation around the electronics. You can use some isolation tape to cover the exposed pins:
 
 ![Isolation tape](https://imaginaerraum.de/git/Telos4/RoboRally/raw/branch/master/docs/images/isolation_tape_2.JPG)
 You can also add some velcro tape to the electronics, the battery and the robot to easily attach and remove the microcontroller from the robot.