STM32F4DoorControl/usb.c

#include <libopencm3/cm3/nvic.h>
#include <libopencm3/stm32/desig.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/usb/cdc.h>
#include <libopencm3/usb/usbd.h>
#include <stddef.h>

#include "usb.h"
#include "ringbuffer.h"

extern ringbuffer *usb_to_uart_buf, *comm_in_buf;

static void usb_reset_callback(void);
static void usb_suspend_callback(void);

/* Number of serial devices we want to provide. */
#define NUM_SERIAL 2

static const uint8_t EP_COMM = 1 + 2 * ACM_COMM;
static const uint8_t EP_NFC = 1 + 2 * ACM_NFC;

 /* CDC-ACM devices need a functional descriptor that looks like this */
struct usb_cdcacm_functional_descriptor {
  struct usb_cdc_header_descriptor header;
  struct usb_cdc_call_management_descriptor call_mgmt;
  struct usb_cdc_acm_descriptor acm;
  struct usb_cdc_union_descriptor cdc_union;
} __attribute__((packed));

/* Allocate some space for our serial */
static char serial[24];

/*
  These strings will be used as identifiers in some descriptors.
 * In descriptors, indices are 1-based, and 0 is an empty string.
 */
static char const *usb_strings[] = {
    "Imaginaerraum.de",
    "DoorControl",
    serial,
    [3 + ACM_COMM] = "Comm",
    [3 + ACM_NFC] = "RFID",
};

static int connected = 0;

usbd_device *g_usbd_dev;

/* The descriptor for our device. We need only one of these. */
static const struct usb_device_descriptor dev = {
    .bLength = USB_DT_DEVICE_SIZE,
    .bDescriptorType = USB_DT_DEVICE,
    .bcdUSB = 0x0200,
    /*
     * Devices with class 0xEF, subclass 2, and protocol 1 are interface
     * associations that can contain multiple unrelated interfaces, like a
     * keyboard and a video device, or multiple serial devices
     */
    .bDeviceClass = 0xEF,
    .bDeviceSubClass = 2,
    .bDeviceProtocol = 1,
    /* Maximum packet size for endpoint zero */
    .bMaxPacketSize0 = 64,
    /* Vendor and product ID are for ST's virtual modem */
    .idVendor = 0x0483,
    .idProduct = 0x5740,
    /* Revision of the device: 2.00 */
    .bcdDevice = 0x0200,
    /* Indices into the string table (starts at 1 - 0 is none) */
    .iManufacturer = 1,
    .iProduct = 2,
    .iSerialNumber = 3,
    /* We only have one configuration */
    .bNumConfigurations = 1,
};

/* Each CDC-ACM device has... */
/* two data endpoints and one control endpoint */
static struct usb_endpoint_descriptor endpoints[3 * NUM_SERIAL];
/* one functional descriptor */
static struct usb_cdcacm_functional_descriptor
    cdcacm_functional_descriptors[NUM_SERIAL];
/* a data interface combining the two data endpoints, and a control interface */
static struct usb_interface_descriptor interface_descriptors[2 * NUM_SERIAL];

/* instantiate the usb_interface struct needed by libopencm3 */
static struct usb_interface interfaces[sizeof(interface_descriptors) / sizeof(interface_descriptors[0])];

/* Create the one configuration we have */
static const struct usb_config_descriptor config = {
    .bLength = USB_DT_CONFIGURATION_SIZE,
    .bDescriptorType = USB_DT_CONFIGURATION,
    .bNumInterfaces =
        sizeof(interface_descriptors) / sizeof(interface_descriptors[0]),
    /* this is filled in later by libopencm3, and also why we can't just create all of this in ROM */
    .wTotalLength = 0,
    /* first and only config */
    .bConfigurationValue = 1,
    /* name of the config (none here) */
    .iConfiguration = 0,
    /* 0x80 is required to be set */
    .bmAttributes = 0x80,
    /* multiply by 2 mA to get maximum power we request */
    .bMaxPower = 100,
    /* pointer to the interfaces declared above */
    .interface = interfaces,
};

/* Buffer to be used for control requests. */
uint8_t usbd_control_buffer[512];

static enum usbd_request_return_codes cdcacm_control_request(
    usbd_device *usbd_dev, struct usb_setup_data *req, uint8_t **buf,
    uint16_t *len,
    void (**complete)(usbd_device *usbd_dev, struct usb_setup_data *req)) {
  (void)complete;
  (void)buf;
  (void)usbd_dev;

  switch (req->bRequest) {
  case USB_CDC_REQ_SET_CONTROL_LINE_STATE: {
    /*
     * This Linux cdc_acm driver requires this to be implemented
     * even though it's optional in the CDC spec, and we don't
     * advertise it in the ACM functional descriptor.
     */
    return USBD_REQ_HANDLED;
    }
  case USB_CDC_REQ_SET_LINE_CODING:
    if (*len < sizeof(struct usb_cdc_line_coding)) {
      return USBD_REQ_NOTSUPP;
    }

    return USBD_REQ_HANDLED;
  }
  return USBD_REQ_NOTSUPP;
}

static void cdcacm_data_rx_cb(usbd_device *usbd_dev, uint8_t ep)
{
  (void)ep;

  char buf[64];

  /* Read some data from the endpoint */
  int len = usbd_ep_read_packet(usbd_dev, ep, buf, 64);

  if (ep == EP_NFC) {
    ringbuffer_add(usb_to_uart_buf, (void*)buf, len);
  } else if (ep == EP_COMM) {
    ringbuffer_add(comm_in_buf, (void*)buf, len);
  }
}

int usb_write_cdcacm(uint8_t acm, void *data, size_t len, int tries) {
  int i = 0;
  while (usbd_ep_write_packet(g_usbd_dev, (1 + 2 * acm) | 0x80, data, len) == 0 && ++i < tries)
    ;
  return i < tries;
}

static void cdcacm_set_config(usbd_device *usbd_dev, uint16_t wValue) {
  (void)wValue;

  for (int i = 0; i < NUM_SERIAL; i++) {
    /* set up all the endpoints for each serial device */
    usbd_ep_setup(usbd_dev, 0x01 + 2*i, USB_ENDPOINT_ATTR_BULK, 64,
                  cdcacm_data_rx_cb);
    usbd_ep_setup(usbd_dev, 0x81 + 2*i, USB_ENDPOINT_ATTR_BULK, 64, NULL);
    usbd_ep_setup(usbd_dev, 0x81 + 2*i + 1, USB_ENDPOINT_ATTR_INTERRUPT, 16, NULL);
  }

  usbd_register_control_callback(
        usbd_dev,
        USB_REQ_TYPE_CLASS | USB_REQ_TYPE_INTERFACE,
        USB_REQ_TYPE_TYPE | USB_REQ_TYPE_RECIPIENT,
        cdcacm_control_request);
}

void usb_reset_callback(void) {
  connected = 1;
}

void usb_suspend_callback(void) {
  connected = 0;
}

bool usb_connected(void) {
  return connected;
}

void usb_setup() {
  rcc_periph_clock_enable(RCC_GPIOA);
  rcc_periph_clock_enable(RCC_OTGFS);
  desig_get_unique_id_as_string(serial, sizeof serial);

  gpio_mode_setup(GPIOA, GPIO_MODE_AF, GPIO_PUPD_NONE, GPIO11 | GPIO12);
  gpio_set_af(GPIOA, GPIO_AF10, GPIO11 | GPIO12);

  for (uint8_t i = 0; i < NUM_SERIAL; i++) {

    /*
     * set up the endpoints Data endpoints are at addresses 1, 3, 5 (or 0x81,
     * 0x83, 0x85) and so on.
     *
     * Control endpoints are at addresses 0x82, 0x84, 0x86...
     */
    /* index of the first data endpoint in our array struct */
    struct usb_endpoint_descriptor *data_ep = &endpoints[3 * i];
    /* Index of the control endpoint */
    struct usb_endpoint_descriptor *ctrl_ep = data_ep + 2;

    /* Numbers of the data and control endpoints */
    const uint8_t data_ep_num = 0x01 + 2*i;
    const uint8_t ctrl_ep_num = data_ep_num + 1;
    /* Interface numbers */
    const uint8_t data_iface = 2*i;
    const uint8_t control_iface = data_iface + 1;

    /* OUT endpoint for data (host to device) */
    data_ep[0] = (struct usb_endpoint_descriptor) {
      .bLength = USB_DT_ENDPOINT_SIZE,
      .bDescriptorType = USB_DT_ENDPOINT,
      .bEndpointAddress = (uint8_t)(data_ep_num),
      .bmAttributes = USB_ENDPOINT_ATTR_BULK,
      .wMaxPacketSize = 64
    };
    /* IN endpoint (device to host) is the same except for the direction */
    data_ep[1] = data_ep[0];
    data_ep[1].bEndpointAddress |= 0x80;

    /*
     * The control endpoint is for interrupt transfers. Its address is one
     * higher than the data endpoints, has smaller packets, and we don't really
     * care about its interval (because we're not using it)
     */
    *ctrl_ep = (struct usb_endpoint_descriptor) {
      .bLength = USB_DT_ENDPOINT_SIZE,
      .bDescriptorType = USB_DT_ENDPOINT,
      .bEndpointAddress = (uint8_t)(0x80 + ctrl_ep_num),
      .bmAttributes = USB_ENDPOINT_ATTR_INTERRUPT,
      .wMaxPacketSize = 16,
      .bInterval = 255
    };

    cdcacm_functional_descriptors[i] = (struct usb_cdcacm_functional_descriptor) {
      .header = (struct usb_cdc_header_descriptor) {
        .bFunctionLength = sizeof (struct usb_cdc_header_descriptor),
        .bDescriptorType = CS_INTERFACE,
        .bDescriptorSubtype = USB_CDC_TYPE_HEADER,
        /* Version of the standard */
        .bcdCDC = 0x0110
      },
      .call_mgmt = (struct usb_cdc_call_management_descriptor) {
        .bFunctionLength = sizeof (struct usb_cdc_call_management_descriptor),
        .bDescriptorType = CS_INTERFACE,
        .bDescriptorSubtype = USB_CDC_TYPE_CALL_MANAGEMENT,
        /* We do no call management */
        .bmCapabilities = 0,
        /* Index of our data interface */
        .bDataInterface = data_iface,
      },
      .acm = (struct usb_cdc_acm_descriptor){
        .bFunctionLength = sizeof (struct usb_cdc_acm_descriptor),
        .bDescriptorType = CS_INTERFACE,
        .bDescriptorSubtype = USB_CDC_TYPE_ACM,
        /* Nothing here either */
        .bmCapabilities = 0,
      },
      .cdc_union = (struct usb_cdc_union_descriptor) {
        .bFunctionLength = sizeof (struct usb_cdc_union_descriptor),
        .bDescriptorType = CS_INTERFACE,
        .bDescriptorSubtype = USB_CDC_TYPE_UNION,
        /* Our interfaces */
        .bControlInterface = control_iface,
        .bSubordinateInterface0 = data_iface,
      }
    };

    /* A plain data interface */
    interface_descriptors[data_iface] = (struct usb_interface_descriptor) {
      .bLength = USB_DT_INTERFACE_SIZE,
      .bDescriptorType = USB_DT_INTERFACE,
      .bInterfaceNumber = data_iface,
      /* This is the first alternate setting. There are no others. */
      .bAlternateSetting = 0,
      /* OUT and IN */
      .bNumEndpoints = 2,
      .bInterfaceClass = USB_CLASS_DATA,
      /* No subclass or protocol */
      .bInterfaceSubClass = 0,
      .bInterfaceProtocol = 0,
      .iInterface = 0,
      /*
       * A pointer to the first of its endpoints - the others must be
       * contiguous.
       */
      .endpoint = data_ep
    };

    /* Required by libopencm3 for some reason. */
    interfaces[data_iface] = (struct usb_interface) {
      .num_altsetting = 1, .altsetting = &interface_descriptors[data_iface]
    };

    /*
     * The control interface gets the actual CDC ACM classes, and the string
     * description. It also needs the CDC ACM functional descriptors.
     */
    interface_descriptors[control_iface] = (struct usb_interface_descriptor) {
      .bLength = USB_DT_INTERFACE_SIZE,
      .bDescriptorType = USB_DT_INTERFACE,
      .bInterfaceNumber = control_iface,
      .bAlternateSetting = 0,
      /* Just one direction here */
      .bNumEndpoints = 1,
      .bInterfaceClass = USB_CLASS_CDC,
      .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
      .bInterfaceProtocol = USB_CDC_PROTOCOL_AT,
      /* The first three names are for manufacturer, product, and serial. */
      .iInterface = (uint8_t)(4 + i),
      /* Pointer to the single endpoint */
      .endpoint = ctrl_ep,
      /* Pointer and length for the CDC ACM functional descriptors */
      .extra = &cdcacm_functional_descriptors[i],
      .extralen = sizeof cdcacm_functional_descriptors[0]
    };
    interfaces[control_iface] = (struct usb_interface){
        .num_altsetting = 1, .altsetting = &interface_descriptors[control_iface]};
  }

  /* Initialize the device... */
  usb_reinit();

  /* And use interrupts instead of polling. */
  // nvic_enable_irq(NVIC_OTG_FS_IRQ);
}

void usb_reinit() {
  g_usbd_dev = usbd_init(&otgfs_usb_driver, &dev, &config,
                         (char const * const *)usb_strings,
                         (sizeof usb_strings) / sizeof(usb_strings[0]),
                         usbd_control_buffer, sizeof(usbd_control_buffer));

  usbd_register_reset_callback(g_usbd_dev, &usb_reset_callback);
  usbd_register_suspend_callback(g_usbd_dev, &usb_suspend_callback);
  usbd_register_set_config_callback(g_usbd_dev, cdcacm_set_config);
}

//void __attribute__((weak)) otg_fs_isr() { }