32 lines
1.0 KiB
Plaintext
32 lines
1.0 KiB
Plaintext
Flashing:
|
|
esptool.py --port /dev/ttyUSB0 erase_flash
|
|
esptool.py --port /dev/ttyUSB0 --baud 460800 write_flash --flash_size=detect 0 esp8266-20190125-v1.10.bin
|
|
|
|
Setting up webrepl:
|
|
Connect using picocom:
|
|
$ picocom /dev/ttyUSB0 -b115200
|
|
|
|
>>> import webrepl_setup
|
|
-> enable, set password and reboot
|
|
|
|
Connect to local wifi:
|
|
>>> import network
|
|
>>> sta_if = network.WLAN(network.STA_IF)
|
|
>>> sta_if.active(True)
|
|
>>> sta_if.connect("<SSID>", "<PW>")
|
|
>>> sta_if.ifconfig() # this prints the IP
|
|
|
|
Use access point to connect:
|
|
>>> import network
|
|
>>> ap_if = network.WLAN(network.AP_IF)
|
|
>>> ap_if.active(True)
|
|
>>> ap_if.ifconfig() # this prints the IP
|
|
|
|
Default passwort for the access point: micropythoN
|
|
|
|
Connect via online Webrepl:
|
|
-> http://micropython.org/webrepl
|
|
- Enter IP from above and click connect. Login with password.
|
|
- Upload boot.py via Webrepl to automatically connect to wifi and start webrepl after reboot
|
|
- You can also upload a file called main.py or just work in the webrepl terminal.
|